Mini Motorcycle GPS Tracker Device for Fleet Management System ,
Truck GPS GSM Tracker
|1||Real time Tracking|
|2||ACC Status Display/Mileage statistics|
|3||Remote Control Oil/Circuit on or off via relay|
|4||History Track Report|
|1||GPS Positioning||You can track your car and check the speed,routes,acc status and
detailed position and so on through your mobile phone or computer.|
|2||Playback Routes||you can check your car's history routes , speed and so on in recent
|3||Setting Function Via SMS||Our device supports sms functions. so you can set many commands via
|4||Ignition Detection||this device can detect your car's ignition status and display on
|5||Vibration Alarm||this unit have vibration sensor.|
|6||Overspeed Alarm||this gps tracker device supports overspeed alarm function when the
speed is more than value you set. it will alert.|
|7||Cut Off Engine||you need to connect the yellow line to one relay. then we can
control the engine on or off via sms command or send command via
platform( For safety considering, it will not cut engine while
speed is above 20km/h)|
|8||Built-in Antenna||Built-in high tech of GPS/GSM antenna for easy installation.|
1. Fleet management
2. Motorbike Truck
3. Rental Car Company
4. Taxi Company
5. Insurance company
|Dimension||67(L) x 33.8(W) x 11.5(H) mm|
|GSM/GPS Antenna||Built-in Design|
|Non-movement Detection||Movement Alert based on built-in 3D|
|Mileage Report||Track by time/distance interval power off|
|GPS LED||Green( Flashing stands for GPS IS OK)|
|GSM LED||Blue( Flashing stands for GSM Signal is ok)|
|Power LED||Red (Flashing stands for unit works with built-in battery|
Steps of installation:
1. Open the back cover,insert a SIM card to SIM Card Slot.
2. Switch power button up(Power on).
3. Connect the power cable with the interface of device. Now theree
LED lights will lighting. Make sure the
receiving side face up, without any metal object shelter. The LED
lights will glashing after 1 to 5mins.
It shows working normally.
4. Close the back cover.
5. Please ask professional technical to connect wires and install
to the vehicle. After correct installation.
the REd LED will falshing, 1 min. Later the Blue Led will falshing
too. That shows installing completely.
|Add Administrator No.1||#6666#AAD#1#Cell No#|